Suggestions

It would be nice to be able to group aircraft. Volanta has this feature. For example, if I have 20 different A320s, I might create 3 groups such as Fenix MSFS 2024, ToLiss XP12, and FSLabs MSFS 2024. Or I could just make an A320 group. This is useful so that you don't just have a huge list of aircraft and its easier to look at and decide which simulator/developer's aircraft to fly.

If possible, users can draw on the map, especially on the ground at the airport to map out taxiing route. It'd be extremely helpful for folks who do not have navigraph subscriptions, which tracks their users in real time their movement on the ground. Since I fly on VATSIM, I normally write down my taxiing instructions and manually reference the charts, which would be a lot of back and forth at busy airports. Having the ability to draw, highlight, or scribble directly onto the map would be a huge help so users can reference the taxiing route right then and there.

It would be great to have the ability to create Groups in Elevatex, allowing friends or communities to fly together and compete. Suggested featuresCreate public or private groups. Invite friends via username or invite link. Group owner/admin permissions. Group LeaderboardsEach group could have multiple leaderboard categories: ✈️ Flight Hours 🛫 Total Flights 🌍 Flight Distance (NM) 🛬 Average Landing Rate ⛽ Fuel Burned (optional)

I’ve had an idea and I don’t know if it’s possible to implement but I’ll say it anyway - Electronic nav log! Just like we have irl, the off blocks/on blocks and takeoff/landing times could be pulled from the sim. This could then populate the ETA at a waypoint, and then you fill in your actual time of arrival and fuels, forming an electronic nav log Don’t think anyone is offering this feature at the moment And if it’s too difficult to get travel time between waypoints, you could always do it manually like we used to do on paper flight plans. This is what we use IRL - it's called Mission+

For example: You forget to start tracking, however you connected to VATSIM. Allow it so you can almost paste the part of your flight that wasn't recorded into your flight track, if you are still in the air. Thanks!

A small one, but I'd really like the ability to add notes to a specific aircraft (in the same way as we already can to flights).

Hi! I recently completed a flight where I had to divert to another airport. However, I forgot to register the diversion in ElevateX while the flight was still active. Currently, as far as I understand, you can register a diversion while the flight is active, but once the flight has ended, there is no way to add or correct the diversion afterwards. It would be great if there was an option to add a diversion after the flight has already been completed, for situations where the user forgot to register it during the flight. For example, an option on the completed flight page such as “Add/Edit Diversion”, where you could select the airport you actually diverted to. This wo…

Hi Elevatex team, I want to suggest a feature that would improve flight data integrity during connectivity or app authorization drops. The Issue: Recently, I experienced a brief period where the Elevatex application lost authorization mid-flight. Because the app couldn't send position reports during that time, my flight map showed a straight line between the disconnection point and the reconnection point, rather than the actual flight path. The Suggestion: It would be great if Elevatex could implement a "fallback" logic for these gaps. If the application detects that it is failing to send position reports, it should automatically cross-reference the active flight plan …

Hello, I've really been enjoying using Elevatex and have been exploring all of the statistics it provides after each flight. I had a question about the Environmental Impact section. On my flights, the fuel saved and CO2 consumption values always remain at 0, even though other flight statistics are being recorded correctly I was wondering if these metrics are still under development. Are there any future plans to calculate and display Fuel Saved and CO2 consumption Reduction based on the flights actual fuel burn or flight profile? I think these would be great additions for users who enjoy tracking aircraft efficiency and comparing flights over time. Thanks in advance …

This will be mostly subjective, so don't take this post as "This must be changed to work this way", this is just my personal opinion about some UI and interactions of things I personally would like to see changed, none of these is a deal breaker, and I can totally see different people having different preferences, so take this simply for what it is. I have no training or formal knowledge about UI and design, so if I can be totally wrong on some things. Although I've already have a play and customized some options, it's 100% possible I missed something that would have "fixed" something that I'm complaining about, so if that's the case please let me know. So, first I…

I submitted a feature request before that ended up with a better compatibility of replay phase. But it seems to be way direct, it just ended flight. I would recommend a mild approach that pauses the flight. This feature can be combined with auto flight completion that has a 15-sec countdown to the end of flight. If replay detected, auto completion pauses, and the countdown comes alive after the replay mode exits.

I think we should be able to split lets say our flights to multiple groups, to be better organised. For instance, i would really like to be able to put on one group my career flights, on another group my freeflight flights, and on another group, my goofy flights, which arent really fligts. Same goes with aircraft. Maybe we could put on one group career aircraft, on another group, addon aircraft, and on another group the rest, or like propeller aircraft on one group, and jet aircraft on another. It could work the same way we organise games on steam, and we can put them in different categories and stuff. Anyways you get my idea, point is organization.

So i got this idea, that goes mainly for vfr flying and smaller planes, not commercial passenger jets, but is applicable everywhere. So, lets say that i want to take my small vfr plane and make a trip in the sim across Europe, which said trip would have many stops across the continent in multiple airports and airfields for refuelling, sightseing and iidk what else. It would be nice if we could create in elevatex a big trip that contains multiple planned legs, and then the app following us through that trip from airport to airport. Basically many flights, but in one big trip. And we could see in the end how much we followed that planned trip, which airports from the planne…

With the upcoming update that will show us the diversion after our flights end, i though it would be a good idea to add an optional field where we can say the reason we diverted. For instance, one diversion i made was due to medical emergency in career, and a different one was because of a mechanical problem. It would be nice to be able to file our reason for diverting.

Hi, I am a new Elevatex user. I take screenshots via Xbox Gamebar with Win+Alt+PrntScrn. This takes two screenshots at once, one HDR and one normal non-HDR screenshot. Elevatex (same as Volanta) can only upload the non-HDR screenshot. However, the HDR screenshot also appears in the upload list, but is shown like it is corrupted. Maybe it could adjusted in such a way that only the non-HDR screenshots appear in the upload section? Volanta also discards the HDR screenshots and does not offer them for upload. Thanks 🙂

So basically, in the fleet and flights pages, when you set a filter, or change the row with the arrow button, next to the filter button, and you click something, lets say an aircraft, and then go back, the filters automaticly reset and get removed, every single time. Its not something that big of a deal at first glance, but it can get really annoying. So, state saving of certain menus would be quite nice. Thanks elevatex-beta 2026-05-15 21-22-54.mp4

Currently, when I upload a screenshot, the screenshot appears on the map at the point my plane was at when I uploaded the screenshot. It would be nice if the app checked the file for the "last modified" or creation dates and used that to place the screenshot at the appropriate position along the flight path instead of where the plane was at time of upload. Or, alternatively, an approach similar to what LRM / FSHub offers, whereby the app can "watch" a screenshot folder and automatically "geotag" the screenshots as they appear. If it did that, then it could parse out the geotag when uploading instead of needing to interpolate the date along the path.

Dear all, first of all, a great tool that is developed right now. For me, what I would like to see is the ability to automatically start the flight logging but without an automatic import of the latest simbrief flight. You only have the chance to deselect it, if the logging doesn't start automatic. In the end a manually edition of the flight is needed after landing. Therefore a posibility to import simbrief manually would be much aprechiated. Best Regards Jan

Hello, it would be cool if the discord RPC can say that you’ve parked at the gate and/or is de-boarding. Right now, it says taxiing to gate and it’s forever stuck on that

it would be good to have the flight hours track simultaneously with the block hours - this will stop having significantly longer flights end due to outside factors such as power cuts, & CTD registering the flight as 0.00 flight hours example below of 8.57 block hours, 5,552 nm flown - power cut and flight hours register as 0.00. I have 11,000+ nm over 3 flights that have a combined block time of over 25 hours register 0.00 flight hours in last 2 weeks through no fault of my own - frustrating.

Many apps on windows 11 allow for f11 Fullscreen. Apps like Xbox, discord, google, and many others. Elevatex on the other hand you can still see the task bar when f11 is pressed and I feel just a nice Fullscreen tracking map would make the app cleaner and more organized. I attached a screenshot of what it looks like even after pressing f11. thanks for considering this request!

Hello, firsttime user and I'm impressed! Fantastic job! I would like to ask if you plan to show airport local times (time time at the plane's location) next to UTC? Like they do on fr24? You can add () next to UTC. I hope it's not difficult to implement this feature. Right now I have to toggle UTC / airport time, and they cannot be been in one place. If this can be true it would add a lot of immersion Also it would be the best if the tracker and flight log can show ETE, block time and airborne time and all OUT/OFF/ON/IN time in UTC and airport local time format. Thank you very much!

It would be a cool feature to be able to toggle between the displayed flights as shown with two options: 1. The current visualization where you see connections between two airports as a straight line An alternative view where you can see your entire network of routes or the routes for a specific aircraft as the drawn routes. Example is like this: but instead of seeing it for one flight you could see it for all of your flights for a plane or your entire route map.

Hi guys, being a web developer and addicted to statistics, I like to build various reports over my flights. I'm currently using Simtoolkitpro, which has a local SQLlite data storage easily accessible, but Im'm evaluating a new platform because after serveral years of use I filnd it a little too "stagnant" and outdated I have to say. Any chance to access Elevatex data via API now or in the future? I know I can export all data at the moment, but the process is not exactely fast or efficient, sice I can only download the whole shebang. Anyway, I really like the app so far, I hope it can become my tracker of choice in the future! Ciao, Gaetano

Can we please: See what is provided by the twitch bot i.e. a list of available commands Control which functions of the bot I'd like on or off for my channel i.e. disable metar and aircraft commands but keep ete and eta with a tooggle? Cheers lads!